Therm-All searches for systems and ways to make handling and installing our products easier - thus reducing your jobsite manhours.

Labor Saving Systems

Therm-All recognizes that the largest variable cost in construction is labor. With over 25 years of listening to you, the customer, we have come up with several Labor Saving ideas.

Over the next 25 years, we want to continue to be the innovation leaders. If you have any good ideas we are listening.

For more information:

ConsealTab®

One of the first and most successful Therm-All innovations, ConsealTab® eliminates the need for staping the insulation.

  • Eliminates stapling of the insulation facing
  • 15-25% savings on sheeting time
  • 14% better perm rating than rolled & stapled insulation
  • Seamless interior appearance
ConcealTab (top) vs. 6" Tab


"Fish-mouthing", which is common with 6" Tab:

ConsealTab vs. 6" tab:

  • ConsealTab lap is a fully supported interlocking tab system
  • ConsealTab tucks the extended tab into the edge of the previous roll
  • ConsealTab provides a quality finished appearance
  • ConsealTab creates true, tight seals

  • A 6" tab provides an unsupported extended tab system
  • A 6" tab has a high potential for gaps and "fish-mouth"
  • A 6" tab offers a direct path for moisture to penetrate the fiberglass

Therm-All
makes it
easier on
the jobsite!

Color-Coded Packaging

  • Red bags – Roof rolls
  • Blue bags – Wall rolls
  • Clear bags – Misc.

Elaminator 300

Therm-All is one of the largest providers of the Elaminator Insulation System in the U.S.

The Elaminator 300 series has many advantages:

  • Fall Protection
  • Improved production…
    wind becomes less of a factor
  • High "R" potential
  • Great appearance

Installation Production
The Elaminator 300 is a production tool. Properly used it will increase daily production, therefore reducing jobsite manhours.

Fall Protection
The Elaminator 300 series provides OSHA approved leading edge fall protection.

A Superior Insulation System
With the patented installation system there are no exposed insulationseams, thus providing superior perm rating and a great appearance.

High-R
With the Elaminator system, you can provide a High-R application for new construction without support wires or structures below. The Elaminator system reduces the compression above the purlins, because the first layer of insulation is installed between the purlins. A layer of backfill insulation is placed over the purlins, to provide insulation for the purlins, and to ensure complete coverage by the insulation.

PDL Doors & Windows

Therm-All is proud to offer doors and windows from PDL Building Products. PDL is a leader in pre-assembled door and window market.

PDL Products:

  • Save labor cost
  • Reduce call-backs
  • Superior quality
   © 2007 Therm-All