High R Systems

New building energy codes along with higher energy costs are increasing the demand for High R metal building insulation systems. At Therm-All we can create cost models that will educate the builder and the building owner as to what system is right for their project.

Therm-All services:
  • Cost models which determine the ROI for each insulation system
  • COMcheck and code compliance assistance

For more information:

Elaminator 300

Therm-All is one of the largest providers of the Elaminator Insulation System in the U.S.

The Elaminator 300 series has many advantages:

  • Fall Protection
  • Improved production…
    wind becomes less of a factor
  • High "R" potential
  • Great appearance

Installation Production
The Elminator 300 is a production tool. Properly used it will increase daily production, therefore reducing jobsite manhours.

Fall Protection
The Eliminator 300 series provides OSHA approved leading edge fall protection.

A Superior Insulation System
With the patented installation system there are no exposed insulationseams, thus providing superior perm rating and a great appearance.

High-R
With the Elaminator system, you can provide a High-R application for new construction without support wires or structures below. The Elaminator system reduces the compression above the purlins, because the first layer of insulation is installed between the purlins. A layer of backfill insulation is placed over the purlins, to provide insulation for the purlins, and to ensure complete coverage by the insulation.

Simple Saver Fills the Purlin Cavity with Insulation.

Simple Saver System®

With today's cost of energy the Simple Saver System has never been more cost effective.

Simple Saver highlighted benefits:
  • Return on investments range from 3 to 7 years
  • Superior vapor barrier
  • Excellent acoustics
  • OSHA approved leading edge fall protection

Better Performance
The Simple Saver System will improve the dew point inside of the building and will reduce the heat loss, heat gain through the roof and wall secondary.

Safer Installation
Simple Saver has been tested and meets OSHA fall protection standards.

Outstanding Finish
By concealing secondary structurals from view the bright white finish of the Simple Saver System makes your building interior brighter. Thus potentially reducing electrical costs, and work place accidents.

High "R" Banding System

A Low Cost Solution To High-R Applications
Blending Cost Economies And Thermal Performance

Many contractors still prefer the ease of installing a High-R Banding System.
 
   © 2007 Therm-All